DAS Components for Mobile Communications

SPINNER products have already been installed in thousands of in-building projects worldwide: they reliably and cost-effectively perform at airports, in shopping malls, on exhibition grounds, in office and governmental buildings, and in hotels and stadiums.

Products and Systems for Combining Frequencies

A number of approaches exist for ensuring successful in-building projects.

Depending on your requirements, SPINNER supports you with individual components, compact systems, or large customer-specific solutions based on our Mobile Network Combining System, MNCS®.

SPINNER MNCS Combining

Components

It’s easy to combine different frequencies with basic components such as our couplers. Our products are characterized by highly effective signal isolation and extremely low intermodulation (PIM).

SPINNER CouplerSPINNER Coupler

SPINNER DiplexerSPINNER Diplexer

Compact Systems

Our small autonomous systems (multiband combiners) are ideal for many applications in which a large number of inputs and frequency ranges are switched through to just a few outputs. You can choose from a wide range of input/output combinations for indoor and outdoor use.

SPINNER Multiband CombinerSPINNER Multiband Combiner

Mobile Network Combining System (MNCS®)

Many projects make it necessary to combine multiple mobile communication frequencies of the same or different operators at a single point of interconnection (POI). If individual frequencies also need to be optimally isolated to reduce mutual interference, our MNCS® is the ideal solution. It is flexibly configured to meet your requirements and supplied ready-to-use.

The MNCS® is 100% passive and maintenance-free. This not only greatly reduces the operating costs of in-building solutions but also avoids costs as a result of later cancellations. It is modular in design, making it extremely versatile and easy to extend at any time.

The components used in our MNCS® components are characterized by high signal isolation, low attenuation, and low intermodulation (low PIM). This ensures problem-free operation and maximum utilization of available bandwidths.

SPINNER DAS MNCSSPINNER Mobile Network Combinig System - MNCS®

Reference Projects

SPINNER liefert 4,3-10 DAS Komponenten für die Tschechische Republik (1.8 MB)

MNCS®-Projekt am Lausitzring (1.1 MB)

Rembrandt Tower in Amsterdam: SPINNER supplies the world’s first DAS installation with 4.3-10 connector system (1.6 MB)

SPINNER MNCS® enables mobile coverage at shopping mall in Rio de Janeiro(1.1 MB)

SPINNER MNCS® on Vodafone campus (0.8 MB)

Products for Distributing Signals

A large selection of symmetrical and asymmetrical splitters and tappers are available for distributing signals.
 
These SPINNER products excel with compact design, wide bandwidths and low intermodulation (low PIM). They require no maintenance and their dependability is unsurpassed.

SPINNER MNCS Distributing

Symmetrical Splitters

SPINNER SplitterSPINNER Stripline 4-Way Splitter (300 W, IP62)

SPINNER Splitter 2SPINNER 2-Way Splitter (500 W, IP68)

Asymmetrical Splitters / Tappers

SPINNER TapperSPINNER 2-WayTapper (300 W, IP65)

SPINNER Tapper2SPINNER 2-WayTapper (500 W)

Loads & Attenuators

For terminating open paths in distribution structures, we offer you an extensive portfolio of resistors and attenuators with different power attenuation values and connectors. They are characterised above all by low intermodulation (PIM) and high suitability for outdoor use.

SPINNER Loads AttenuatorsSPINNER Loads and Attenuators

© 2016 | SPINNER GmbH | Erzgiessereistr. 33 | 80335 Munich | Germany
Phone +49 89 12601-0 | info@spinner-group.com | Imprint | Data Privacy Policy