SPINNER Antenna Monitoring System - AMS

SPINNER AMSRadio and television broadcasters rely on their systems to deliver content to subscribers. Though the infrastructure is robust, it is not failure-free. The insulation of cables and dipole antennas can become brittle and crack from prolonged exposure to UV radiation. Feeder cables can be damaged by strong winds, ice or corrosion. Problems can also result from improper installation or RF overloads.

In the long term, these problems can cause the site to be off-air through degraded RF-components or even lead to fire, completely disabling the broadcast system. Operators therefore need a system that reliably detects and pinpoints problems before they can lead to more serious damage. The SPINNER Antenna Monitoring System does all this and more.

The AMS is engineered to detect arcing and water ingress in broadcast transmission systems at an early stage and alert you to problems before major damage can occur. It helps you stay on air.

This SPINNER solution monitors the entire antenna system, including patch panels, feeder cables and dipoles. New, recently patented measurement methods reliably detect even minimal arcing and compromised insulation in antennas of any height.

All events are continuously recorded and can be checked from anywhere via a user-friendly web interface. If arcing is detected, the AMS triggers an alarm locally on LED lamps and remotely via an SNMP interface. The transmitter can be optionally connected via an interlock interface that cuts off or reduces the power to protect equipment.

All components are indoors with fast and easy installation, also in existing sites. The AMS is available in two different versions for FM, VHF and UHF:

SPINNER AMS rigid line

AMS U-Links

To ensure fast and easy installation and minimally invasive changes to existing systems, we have integrated the AMS detector in U-links for mounting on any SPINNER patch panel.

AMS U-links are available in the following sizes: 1 5/8”, 29-68, 43-98 and 52-120.

SPINNER AMS U linkAMS Rigid Line Sections

To give you greater flexibility for installing the Antenna Monitoring System anywhere, SPINNER has developed rigid AMS line sections for insertion in any rigid line.

AMS line sections are available in sizes ranging from 1 5/8” EIA to 9 3/16” EIA.

 

 

 

Your Contact

SPINNER GmbH
Mr Yuri Silva Durco
Erzgiessereistr. 33
80335 Munich
Germany

Phone +49 (89) 12601-1135
This email address is being protected from spambots. You need JavaScript enabled to view it.

Download

SPINNER AMS Flyer (2.5 MB)

 

© 2017 | SPINNER GmbH | Erzgiessereistr. 33 | 80335 Munich | Germany
Phone +49 (89) 12601-0 | info@spinner-group.com | Imprint | Data Privacy Policy