EasyDock 7-16 Now PIM-Enabled

The SPINNER EasyDock, a self-centering adaptor for measurement interfaces, is ideally suited for automated testing environments. Available for all common connector types such as 7-16, 4.3-10, 4.1-9.5...

4 in 1 System - A Complete Solution for Television Stations

The post-mask filter signal needs to be measured during installation and occasional maintenance. One way to accomplish this task is to forward the signal to a test load and measure its frequency response using a directional coupler.

SPINNER has a complete solution to make this process easy, fast and failsafe. SPINNER integrated FOUR COMPONENTS - mask filter, load, directional coupler and patch panel – IN just ONE system. Keeping in mind the space limitation at many sites, the solution has been made as compact as possible.

The SPINNER 4 in 1 solutions are available for all power ranges. The systems are shipped fully assembled, tuned and measured.

The Benefits of Calibrating Vector Network Analyzers Mechanically

You can combine our new loads and attenuators specifically to meet your requirements. You decide which connector systems are to be installed, the power to be absorbed and, in addition to this, you also define the attenuation for the attenuators and if required, an integrated DC break.

SPINNER assembles your individual product for you – without a surcharge – which can be delivered quickly.

Secure Transmission of Digital Data in Rotating Applications

The advantages of RF rotary joints from SPINNER include their compact design, outstanding VSWR and low insertion loss, low deviations of transmission properties during the rotation and a high degree of isolation between the individual channels throughout the entire frequency range.