EasyDock 7-16 Now PIM-Enabled

The SPINNER EasyDock, a self-centering adaptor for measurement interfaces, is ideally suited for automated testing environments. Available for all common connector types such as 7-16, 4.3-10, 4.1-9.5...

The Benefits of Calibrating Vector Network Analyzers Mechanically

You can combine our new loads and attenuators specifically to meet your requirements. You decide which connector systems are to be installed, the power to be absorbed and, in addition to this, you also define the attenuation for the attenuators and if required, an integrated DC break.

SPINNER assembles your individual product for you – without a surcharge – which can be delivered quickly.

4 in 1 System - A Complete Solution for Television Stations

The post-mask filter signal needs to be measured during installation and occasional maintenance. One way to accomplish this task is to forward the signal to a test load and measure its frequency response using a directional coupler.

SPINNER has a complete solution to make this process easy, fast and failsafe. SPINNER integrated FOUR COMPONENTS - mask filter, load, directional coupler and patch panel – IN just ONE system. Keeping in mind the space limitation at many sites, the solution has been made as compact as possible.

The SPINNER 4 in 1 solutions are available for all power ranges. The systems are shipped fully assembled, tuned and measured.

Secure Transmission of Digital Data in Rotating Applications

The advantages of RF rotary joints from SPINNER include their compact design, outstanding VSWR and low insertion loss, low deviations of transmission properties during the rotation and a high degree of isolation between the individual channels throughout the entire frequency range.

Radar Rotary Joints with Contactless Data Transmission

The radical reduction in cabling saves weight and increases the efficiency of the system. However, ever increasing amounts of data with high transmission rates also require demanding digital data transmission solutions.

New MNCS - now even more flexible

The demands on the SPINNER MNCS system have changed in recent years: Smartphones with dominant data connections, LTE and MIMO antenna systems are challenges which will also need to be conquered cost-effectively in the future.

PIM as LTE Brake - not with SPINNER

Long Term Evolution or LTE for short is the term on every-one’s lips – new frequencies and improved technology provide users with greater bandwidths and even faster access times on mobile networks. Many countries are working flat-out to develop their network.

Brasilia Tower

We are proud to announce SPINNER as the combining system supplier for the Brasilia Tower. It is the first television tower with antenna sharing in Brazil, where public and private channels are combined and broadcasted by one common antenna.

SPINNER Simplifies Frequency Combining

More and more mobile network providers are building on the economic advantages of a shared infrastructure. New frequencies or providers had to be interconnected again at great effort and expense.

New Media Rotary Joints

At the end of 2013, the first media rotary joint made by SPINNER was delivered. This milstone is a very important step for SPINNER regarding its development from supplier of high frequency (RF) and optic as well as non-contacting signal transmitters to a system provider for rotary joints.